Our Products
.jpg "Milestone X3100 Joystick")
$430.00
Milestone X3100 Joystick
The NG Systems X3100 USB joystick controller is designed specifically for IP video surveillance systems and features a sturdy, 3-axis, industry standard joystick and 21 user-defined push buttons ergonomically arranged to suit many video applications (layout optimized for Milestone software).
The keyboard’s sturdy mild-steel construction allows for single-handed joystick control and the intuitively placed push-buttons enable the keyboard to be operated without taking your eyes off the screen.
The X3100 is powered directly from the PC’s USB port and is automatically installed by the Windows operating system.
$430 USD
$365.00
Pinger IPS1
The NG Systems PINGER is a portable hand-held instrument designed for engineers involved in the installation and/or maintenance of IP-based CCTV camera systems. It will interrogate a local area network (LAN) and report on all active cameras found, displaying their Make, Model, MAC address, IP address and Port Number (if available), on its backlit, 80 character LCD display.
http://www.stlsecurity.com/cache/rokquickcart/cart/images/rokquickcart/samples/pinger1.jpg
$60.00
POE/Data Splitter XPS1
The NG Systems PoE/Data Splitter (XPS1) is an installation device which allows PoE power to be delivered to a camera whilst allowing a direct connection to a laptop or other device enabling rapid camera installation/configuration and focusing.
http://www.stlsecurity.com/cache/rokquickcart/cart/images/rokquickcart/samples/XPS1prod.jpg
$239.00
Cable Length Meter CLM1
For use with RG59 (75 Ohms) and RG58 (50 Ohms) or equivalent coaxial cable, this meter provides a direct readout in metres of the length of an un-terminated run of coaxial cable with a resolution of 2-3 metres. A single range of 2.5 to 400 metres on a 4 digit LCD display is provided with automatic indication of open circuit and short circuit conductors. By this means, the location of a short or open circuit in cable runs of up to 800 metres may be found.
http://www.stlsecurity.com/cache/rokquickcart/cart/images/rokquickcart/samples/clm1-lg.jpg
$184.00
Video Level Meter VLM1
This meter provides a direct reading in volts of peak white and sync levels of a CCTV signal on a 4 digit LCD display. An input impedance switch provides selection between terminated (75 Ohms) and un-terminated (high impedance) input.
http://www.stlsecurity.com/cache/rokquickcart/cart/images/rokquickcart/samples/vlm1_lg.jpg
$184.00
Focus Indicator FM1
This unit will allow fine adjustment of overall focus of a CCTV camera, especially useful whenever a monitor is not available. It operates by analysing the detail in the centre of the picture and provides a 10 bar LED readout, displaying maximum output when the camera image is in sharpest focus. An input impedance switch provides selection between terminated (75 Ohm) and un-terminated (high impedance) input.
http://www.stlsecurity.com/cache/rokquickcart/cart/images/rokquickcart/samples/fm1-lg.jpg
Your Cart: ( items)
SubTotal:
Shipping:
Total:
