We are proud to be the North American Distributor of NG Systems products. For more information about NG Systems and their full product line, please click here!
The following items are locally stocked and available for purchase directly through our website. For information on purchasing NG Systems products that are not listed on this page, please call our office and we will be happy to help you.
You may also place your orders by phone at (314) 842-4500!
TCP/IP CCTV Equipment
|
 |
Pinger IPS1
The NG Systems PINGER is a portable hand-held instrument designed for engineers involved in the installation and/or maintenance of IP-based CCTV camera systems. It will interrogate a local area network (LAN) and report on all active cameras found, displaying their Make, Model, MAC address, IP address and Port Number (if available), on its backlit, 80 character LCD display.
|
 |
 |
PoE/Data Splitter XPS1
The NG Systems PoE/Data Splitter (XPS1) is an installation device which allows PoE power to be delivered to a camera whilst allowing a direct connection to a laptop or other device enabling rapid camera installation/configuration and focusing.
|
|
 |
X3100 CCTV USB Joystick Controller
The NG Systems X3100 USB joystick controller is designed specifically for IP video surveillance systems and features a sturdy, 3-axis, industry standard joystick and 21 user-defined push buttons ergonomically arranged to suit many video applications.
|
|
|
Analog CCTV Test Equipment
|
 |
Cable Length Meter CLM1
For use with RG59 (75 Ohms) and RG58 (50 Ohms) or equivalent coaxial cable, this meter provides a direct readout in metres of the length of an un-terminated run of coaxial cable with a resolution of 2-3 metres. A single range of 2.5 to 400 metres on a 4 digit LCD display is provided with automatic indication of open circuit and short circuit conductors. By this means, the location of a short or open circuit in cable runs of up to 800 metres may be found.
|
|
 |
Video Level Meter VLM1
This meter provides a direct reading in volts of peak white and sync levels of a CCTV signal on a 4 digit LCD display. An input impedance switch provides selection between terminated (75 Ohms) and un-terminated (high impedance) input
|
|
 |
Focus Indicator FM1
This unit will allow fine adjustment of overall focus of a CCTV camera, especially useful whenever a monitor is not available. It operates by analysing the detail in the centre of the picture and provides a 10 bar LED readout, displaying maximum output when the camera image is in sharpest focus. An input impedance switch provides selection between terminated (75 Ohm) and un-terminated (high impedance) input.
|
|
|
